Find Cold Therapy System, Knee Rehabilitation Equipment, Cryo Cuff Cooler on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Medical Cold Therapy > Cold Therapy System > Cold Therapy System Cryo Cuff Cooler

Cold Therapy System Cryo Cuff Cooler

Basic Info

Model No.: H2

Product Description

EVERCRYO Cryo Cuff Cooler integrated cold and compression function, helps to reduce post-operative swelling.

The Cryo Cuff Cooler provides both gravity and motorized cold and compression therapy for flexibility of care. The optional pneumatic pump provides automated cold and compression therapy, with simplicity of design and ease-of- use operation.

Knee cold therapy system

Features

1. The cold therapy system combine cold and compression therapy all in one
2. Two kinds of cold and compression therapy ways: gravity and motorized for flexibility of care
3. An Optional pneumatic pump provides automated compression and cyclically cold therapy
4. Main components are cooler and cuff,there are 10 different cuffs for each body part
5. anatomically designed to completely fit the body providing maximum cryotherapy
6. Simplicity of design and ease of operation makes it ideal for post-operative recovery, trauma, athletic training rooms and home use

knee cuff cooler

Application

The Evercryo series cryo cuff cooler is a new medical device that combines compression with cold to control swelling, edema, hematoma, hemarthrosis, and pain in the joints . Simplicity of design and ease of operation makes it ideal for the medical institutions,plastic operation,gym,home and so on. Such as follows:
l Post Operative
l Plastic Surgery
l General Surgery
l Arthroscopic Procedures
l Reconstructive Procedures
l Chronic Pain
l Physical Therapy

Knee Rehabilitation Equipment

Operating principle
The cooler is filled with water and ice and the cuff is placed on the injured part. Elevating the cooler forces cold water flow into the cuff and compresses the injured part. The higher the cooler is elevated above the injured part the more water will flow in to the cuff. (or use electronic circulation system to pump ice water into cuff automatically and circularly)

Usage
1. Prepare cooler: Connect the blue tube to the cooler. Add cold water to the line inside the cooler, then add ice to the top of the cooler. Wait 5 minutes with occasional shaking to chill the water.
2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.
3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.
4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Wait a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process. (Step 3)


Clean & Storage:
When you are not using the cuff and cooler, you need to drain all the water out of the cuff, tubes, and the cooler.
1. Connect the tubes and drain the cuff into the cooler.
2. Take the tubes apart at the metal tab. Lift the cuff tube up while pressing on the metal tab to drain out any water in the tube.
3. Drain the water out of the cooler. Lift the tube on the cooler to drain the water out of it.
4. Leave the cover off the cooler unit to let it dry.

Special Notes:
1. Check the skin under the cuff to be sure it is not damaged by the cold.
2. Do not raise the cooler higher than 15 inches above the cuff because it may cause too much pressure in the cuff.
3. If you have any increase in pain, numbness or tingling of the arm, check that the cuff is not too tight, or too full. If you adjust the cuff, and the pain, numbness or tingling do not ease, call your doctor.




one cooler can use together with different models' cuff, here are the other optional parts:

cryo cuff cooler


Shipping&Packaging

Packing list: 1 pcs cooler+10 different models' cuff+1 pcs circulation system

Packaging: Valve bag for each cuff and cooler, paper box for circulation system, then all packed in a carton, carton size: 61.5*33.4*33cm, 6.2kgs

Lead Time: 3~7 working days for sample, 25~35 working days for bulk order according to the quantity.

Delivery method: By sea, by air or express, according to customers' requirements.

Packing and shipping


About Us
Chengdu Cryo-Push Medical Technology Co., Ltd. is an advanced modern enterprise specializing in the research and development, production and sales of the bone division, rehabilitation division and physical treatment products.
Our products have obtained CE and FDA certificates. We have established long stable relationships with many famous hospitals in China so that we can always improve our products and meet the demands of many customers.
Our main products include:
cold wrap,
cold compression wrap,
cold therapy system,
electric far infrared heating brace,
pulse cold compression therapy system,
waterproof cast & bandage protector,
disposable medical tube holder,
Knee support,
cervical neck traction and so on.

Contact us if you need more details on Cold Therapy System. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Knee Rehabilitation Equipment、Cryo Cuff Cooler. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Medical Cold Therapy > Cold Therapy System